Board index The Extra Bolt Garage Powder Coat Removal

Powder Coat Removal

Post your mechanical questions here. Tips. Trick. Techniques.

Post Wed Oct 07, 2020 7:43 am

Posts: 184

Looking for advise or suggestions on removing powder coating from a motorcycle frame. :dunno

Post Wed Oct 07, 2020 10:25 am

Posts: 7
The whole frame? My buddy has a dustless blaster. Like sand blasting but with water for cooling and no dust. More of a mist. The problem with the water is it has to be dried and prepped to paint can't just leave it rusting. Probably not cheap. Would paint stripper work? Maybe try it.

Sent from my SAMSUNG-SM-G930A using Tapatalk

Post Sun Oct 11, 2020 12:15 pm

Posts: 1588
I've used the jelly aircraft paint stripper on springs, works well. nasty stuff though.
wear a face shield and good gloves.

Post Sun Oct 11, 2020 3:44 pm
heavy grit sand blasting would work. I had a guy who made gravestones blast a maico frame once,was pretty cheap. They use a heavy grit abrasive to blast the stones. No joke,but i admit it does sound odd.

Return to The Extra Bolt Garage