Board index All Things Vintage NETRA Vintage Swap Meet

NETRA Vintage Swap Meet

A place to relive, revive, and ride that "old iron".

Post Mon Mar 30, 2020 11:45 pm

Posts: 1209
T-Dub13 wrote:
Looking for a set of rear shocks. 18" long eye-to-eye. Originals are remote rez. Non-rebuildable and very blown out. Would consider piggies too. cash awaits.


Todd pretty sure I have a set of newer Fox non reservoir shocks at 18". I got them for my 80 CR but found a set of 17.5 later on.
Tom A.
SRCR President
Vintage Series Racer
1977 MX3, 1977 RM 175, 1980 CR250R, 1981 PE250, 1988 Cagiva WMX, 90 CRM250, 98 YZ250

Post Tue Mar 31, 2020 8:30 am

Posts: 879
Cool Tom, I will PM you. Thanks!
Valves are STILL for toilets!

Post Wed Apr 22, 2020 6:19 pm

Posts: 879
Does anyone have use for original OEM NITTO tires? These came on a lot of bikes in the mid 70's. No rot, just some mild use. Might be good for a period resto. Rear isn't that great, but front has some nubs left on it.
FREE. FREE FREE
18" and 21"
14872.jpeg
Valves are STILL for toilets!

Post Sat Jun 20, 2020 7:16 pm

Posts: 176
A 1993 Suzuki RMX 250
1990 Kawasaki KDX 200 owners/shop manual
2000 Suzuki DRZ 400 (kick start version, no battery) with 2000 Parts bike (electric start)
1980's Bell Moto 3 helmet.
1986 Honda CR250 complete front end minus the brakes and fender.
1986 Yamaha TY350 swing arm

Post Fri Jun 26, 2020 8:13 am

Posts: 66
looking for rear spokes for a 93 dr350. a few or all. dr250/350 are the same

Post Thu Nov 12, 2020 8:36 am
BT
C Class Poster

Posts: 45
Seat Wanted:

Does anybody have an old seat from a late 1960's to early 1970's enduro or mx bike that they want to get rid of? I am looking for a seat to complete a project bike that I'm working on. Ideally it would be about 18 to 20" long, maybe 10" wide at the rear. I have a vintage Bates solo seat that I will trade or I will pay cash for the right seat. I'm looking for something like this:
the look 6.jpg

It does not have to be that exact seat, though that would be ideal, I'm just looking for something about that size.
Please PM me if you think you might have any leads.
Thanks,

Bill T :thumbsup:

Post Sun Jan 31, 2021 4:08 pm

Posts: 879
1979 IT175 Cylinder and head. Cylinder measures 66.5mm. I think that's 2nd over.

No broken fins. Needs a light hone.

thumbnail_20210130_085942.jpg

thumbnail_20210130_090006.jpg

thumbnail_20210130_090046.jpg

Offers, trades, promises... PM me here
Valves are STILL for toilets!

Post Sun Jan 31, 2021 4:20 pm

Posts: 879
1984 - 86 IT200 Cylinder and head. Measures 66.17mm above Exh port. will need a 1st over bore and hone.

Broken clutch cable tab, weldable. No broken fins. Aluminum paint for your speedy enjoyment.

thumbnail_20210130_085630.jpg

thumbnail_20210130_085737.jpg

thumbnail_20210130_085815.jpg


Offers, Trades, Promises. PM me here
Valves are STILL for toilets!

Post Sun Jan 31, 2021 4:27 pm

Posts: 879
1979 KX250 UNI air filter new.

1985 KLR600 Voltage Reg.

Owners / Service Manuals:
-00, XR100
-05, CRF250X
-80, YZ50
-82, IT175
-79, KX125
-68-82 Honda Z50's

PM here me if interested.
Valves are STILL for toilets!

Post Tue Feb 02, 2021 10:10 am
jsc
C Class Poster

Posts: 165
T-Dub13 wrote:
1984 - 86 IT200 Cylinder and head. Measures 66.17mm above Exh port. will need a 1st over bore and hone.

Broken clutch cable tab, weldable. No broken fins. Aluminum paint for your speedy enjoyment.

thumbnail_20210130_085630.jpg

thumbnail_20210130_085737.jpg

thumbnail_20210130_085815.jpg


Offers, Trades, Promises. PM me here

PM sent

Post Mon Mar 01, 2021 9:39 pm

Posts: 459
Need KTM 250 kick start lever. 84 85 86 14mm dia shaft.
Have 86 and 87 parts left over also.

Previous

Return to All Things Vintage