Board index All Things Vintage NETRA Vintage Swap Meet

NETRA Vintage Swap Meet

A place to relive, revive, and ride that "old iron".

Post Tue May 21, 2019 7:35 am

Posts: 359
FATDADRACING wrote:
hub98 wrote:
Looking for a carb for a 94-96 wr250. Not sure what other carbs or years would fit. Thanks


I’ve got a mikuni TM flat slide from a 91..not sure of the shape it’s in but still on the bike and throttle works smoothly..idk if it the same as a 94.



Stock is a mikuni round slide. Not sure that would fit. Let me look into it more. Thanks
mister cellophane

Post Tue May 21, 2019 7:40 am

Posts: 459
Looking for a good shift lever for 88 YZ125 possibly for Sat if you can bring to Clarkies. Steel preferred but will take anything with good splines. They list 87 to 97. Thanks
Also timing cover needed if available.

Post Tue May 21, 2019 9:59 am

Posts: 663
I've got:
1. a bin of IT 250/490 side panels and fenders
2. IT250/490/TT600 front and rear hubs with new bearings and semi-gloss black powdercoat, very nice. Has rear brake plate but not front.
3. Re-anodized front and rear rims for IT250/490, and assorted other ITs, YZ's and TTs. Brushed aluminum matte finish.
3. IT 250/490 swingarm - nice, still has good looking OEM decal
4. Brand new set of shiny white plastic front and rear fenders, with taillight for 1970s/early 1980's Husqvarna
5. Brand new no-name set of 18 / 21 inch aluminum rims. I know they fit Husky, and most likely many other bikes.
Ride On.

Post Tue May 21, 2019 10:00 am

Posts: 663
I've got:
1. a bin of IT 250/490 side panels and fenders
2. IT250/490/TT600 front and rear hubs with new bearings and semi-gloss black powdercoat, very nice. Has rear brake plate but not front.
3. Re-anodized front and rear rims for IT250/490, and assorted other ITs, YZ's and TTs. Brushed aluminum matte finish.
3. IT 250/490 swingarm - nice, still has good looking OEM decal
4. Brand new set of shiny white plastic front and rear fenders, with taillight for 1970s/early 1980's Husqvarna
5. Brand new no-name set of 18 / 21 inch aluminum rims. I know they fit Husky, and most likely many other bikes.
Ride On.

Post Tue May 21, 2019 10:52 am

Posts: 1209
fishon401 wrote:
I've got:
1. a bin of IT 250/490 side panels and fenders
2. IT250/490/TT600 front and rear hubs with new bearings and semi-gloss black powdercoat, very nice. Has rear brake plate but not front.
3. Re-anodized front and rear rims for IT250/490, and assorted other ITs, YZ's and TTs. Brushed aluminum matte finish.
3. IT 250/490 swingarm - nice, still has good looking OEM decal
4. Brand new set of shiny white plastic front and rear fenders, with taillight for 1970s/early 1980's Husqvarna
5. Brand new no-name set of 18 / 21 inch aluminum rims. I know they fit Husky, and most likely many other bikes.



Sent a PM..
Tom A.
SRCR President
Vintage Series Racer
1977 MX3, 1977 RM 175, 1980 CR250R, 1981 PE250, 1988 Cagiva WMX, 90 CRM250, 98 YZ250

Post Wed May 29, 2019 6:54 am

Posts: 384
I have an air box with both boots, in very nice condition, for a Honda MR175, if anyone wants it.
Attachments
MR175.jpg

Post Fri Jun 07, 2019 6:53 am

Posts: 247
Location: CT
Looking for an XL175 or XL185 (possibly XR200) engine/carb/airbox.

Have 1990/1991 KX125 bottom end and a few front wheels for an E series KDX

Post Mon Jun 10, 2019 7:31 am
BT
C Class Poster

Posts: 45
I have a POR15 Motorcycle Fuel Tank Repair Kit that I bought from Eastwood a few years back but never got around to using. https://www.eastwood.com/por-15-cycle-fuel-tank-repair-kit.html It is still in the original box. I will bring it to the Satan's Kingdom Vintage event this Saturday. See me if interested.
Bill T.

Post Mon Jun 10, 2019 11:00 am

Posts: 1396
Aluminum 76 YZ tank. Pretty good shape, just a few shallow acorn dents in it. $175 to any of you all. ***SOLD***
Attachments
5D8DDEA8-0E71-4B11-975B-9A69BE3BBD67.jpeg
DC7C5AB8-6AA6-4B93-B79F-915D1D25C9FD.jpeg

Post Mon Jun 10, 2019 4:47 pm

Posts: 459
1980 CR125 tank with petcock and mounts. $75
Attachments
P6232489.JPG
P6232488.JPG

Post Mon Jun 10, 2019 8:32 pm

Posts: 683
sgthubbard60 wrote:
Aluminum 76 YZ tank. Pretty good shape, just a few shallow acorn dents in it. $175 to any of you all.


Christ, I would’ve bought that before the mx175... :shock it would look good on the TT

Post Mon Jun 10, 2019 9:14 pm

Posts: 1507
FATDADRACING wrote:
sgthubbard60 wrote:
Aluminum 76 YZ tank. Pretty good shape, just a few shallow acorn dents in it. $175 to any of you all.


Christ, I would’ve bought that before the mx175... :shock it would look good on the TT


that won't fit your TT without extensive mods to the tunnel

or get an aftermarket frame that doesn't hold oil

Post Tue Jun 11, 2019 2:10 pm

Posts: 1396
Buy it and put it on the MX! :thumbsup:

FATDADRACING wrote:
sgthubbard60 wrote:
Aluminum 76 YZ tank. Pretty good shape, just a few shallow acorn dents in it. $175 to any of you all.


Christ, I would’ve bought that before the mx175... :shock it would look good on the TT

Post Tue Jun 11, 2019 4:29 pm
dwarf66 messaged you here and facebook messaged for measurements of tank, let me know! Thanks, Bucky

Post Wed Jun 12, 2019 10:03 am

Posts: 683
JackPiner wrote:
FATDADRACING wrote:
sgthubbard60 wrote:
Aluminum 76 YZ tank. Pretty good shape, just a few shallow acorn dents in it. $175 to any of you all.


Christ, I would’ve bought that before the mx175... :shock it would look good on the TT


that won't fit your TT without extensive mods to the tunnel

or get an aftermarket frame that doesn't hold oil


I was thinking of taking marks husky frame and going full HL :rofl

Post Wed Jun 12, 2019 4:47 pm

Posts: 115
Location: Foster, RI
Miscellaneous bits for 87/88 KTM 250 (Some items may also fit 86 models)

WP Mono Shock - $30
Swingarm - $25
Frame - $40
Seat - $25
(2) Original Expansion Chambers -$40 ea
Other odds and ends.

Everything is in good usable shape.

Cash or will swap for pre-79 KTM parts or Interesting Beers (preferably IPA’s) :beer

Thanks,

Kevin

Post Mon Jun 17, 2019 4:27 pm
RM
B Class Poster

Posts: 486
KJDonovan wrote:
Miscellaneous bits for 87/88 KTM 250 (Some items may also fit 86 models)

WP Mono Shock - $30
Swingarm - $25
Frame - $40
Seat - $25
(2) Original Expansion Chambers -$40 ea
Other odds and ends.

Everything is in good usable shape.

Cash or will swap for pre-79 KTM parts or Interesting Beers (preferably IPA’s) :beer

Thanks,

Kevin


Kevin, do you know if any of this stuff would fit an 85 250?

BTW, I could not find an aluminum threaded bung for the husky tank-thinking of just flat plate and going with a flanged petcock.

Post Tue Jun 18, 2019 7:41 am

Posts: 115
Location: Foster, RI
Dan,

I will take a look at my parts lists to see if anything fits the 85 250’s as well. With KTM stuff it’s entirely possible as many of their parts retained common designs for several model years.

Thanks,

Kevin

Post Sun Jul 21, 2019 8:41 pm

Posts: 1507
SOLD
Last edited by JackPiner on Thu Aug 15, 2019 8:49 pm, edited 1 time in total.

Post Sun Jul 28, 2019 4:35 pm

Posts: 247
Location: CT
Have a set of 14.5” (currently spaced down to 13.5”) Boge Mulholland LTG Shocks. Good shape.

Need a 1977 IT175 gas cap.

Post Sun Jul 28, 2019 8:25 pm

Posts: 272
KDXKevin wrote:
Have a set of 14.5” (currently spaced down to 13.5”) Boge Mulholland LTG Shocks. Good shape.

Need a 1977 IT175 gas cap.


I'll take that trade.

Post Wed Aug 07, 2019 11:34 am

Posts: 1209
Just picked up two sets of forks and front wheels for some early Kawasaki bikes. Look like KX front ends and both are 38mm.
Tom A.
SRCR President
Vintage Series Racer
1977 MX3, 1977 RM 175, 1980 CR250R, 1981 PE250, 1988 Cagiva WMX, 90 CRM250, 98 YZ250

Post Fri Aug 09, 2019 9:58 pm

Posts: 272
Looking for a set of '87 TLR 200 shocks, nothing too fancy.

Post Tue Aug 13, 2019 5:06 pm

Posts: 459
Need rear axle nut for 88 yz 125. I know a rear nut from 86 CR 250 fits also.

Post Tue Aug 13, 2019 5:18 pm

Posts: 1507
dwarf66 wrote:
Need rear axle nut for 88 yz 125. I know a rear nut from 86 CR 250 fits also.


They’re still available new from Yamaha for like seven bucks

PreviousNext

Return to All Things Vintage

cron